| Model | JDP-3500, JDP-6000, JDP-10000 |
|---|
SUNSUN JDP-Series Pump
$99.00 – $205.00
FEATURES
- Multi function intelligent control layout, can adjust flow and power.
- The water pump uses the latest three-phase power with brushless and sensorless control technology, energy saving up to 50%.
- Low-voltage 24V, safe and converse electricity.
- Using closed impeller design can be economically efficient to improve lift and output.
- Super silence, can be used both in fresh and sea water.
- Use ceramic shaft, wear resistance, no rust.
- Long service life, no copper element.
- The outlet realize muitistage over, suitable for a variety of pipe diameter connection.
- Separation of electric drive, more safe and stable.
- The locked-rotor protection function(immediately cut off power after impeller jammed.)
| Model | JDP-3500 | JDP-6000 | JDP-10000 |
| Rated Voltage | DC 24V | DC 24V | DC 24V |
| Rated Frequency | 50Hz/60Hz | 50Hz/60Hz | 50Hz/60Hz |
| Rated Power | 10W-35W | 13W-60W | 20W-100W |
| Maximum Lift | 1.7m | 1.6-5.0m | 5.8m |
| Maximum Flow | 2300-3500L/h | 3000-6000L/h | 6000-10000L/h |
| Outlet (mm) | 20, 25, 32 | 20, 25, 32 | 20, 25, 32, 38, 50 |
| Weigtht | 1.1kg | 1.9kg | 2.9kg |
| Dimension | 155x72x97mm | 175x83x113mm | 195x95x125mm |
Additional information
Related products
HAILEA ACO-99 Series Air Pump
| Model | ACO-9902 | ACO-9905 |
| Flowrate (l/min) | 2.5 | 6.5 |
| Power (W) | 2.2 | 6 |
Onga Leisuretime Pool Pump
- The range of LeisureTime pool pumps have been purposefully designed to provide maximum performance and corrosion resistance at a realistic cost.
Features
- Self-aligning barrel unions
- Elevated motor foot
- Corrosion resistant endshield
- Large hair and lint pot with see through lid
- Low friction lint pot O-ring
Oase OptiMax 300 – 1000
- Proper movement: Ideal for efficient water circulation or for operating an aquarium filter
- Easy to adjust: The water flow rate can be easily adjusted
- Area of application: Only for use inside the aquarium and underwater
- Efficient: Particularly efficient water supply
- Compact design: The OptiMax 300 and 500 are particularly easy to conceal
- Practical: Two suction holders for mounting in place
| Model | OptiMax 300 | OptiMax 500 | OptiMax 800 | OptiMax 1000 |
| Dimensions (L x W x H) (mm) | 55 x 42 x 60 | 55 x 42 x 60 | 78 x 52 x 88 | 78 x 52 x 88 |
| Rated voltage | 230 V / 50 Hz | 230 V / 50 Hz | 230 V / 50 Hz | 230 V / 50 Hz |
| Power consumption (W) | 5 | 6 | 7 | 12 |
| Power cable length (m) | 1.50 | 1.5 | 1.5 | 1.5 |
| Net weight (kg) | 0.18 | 0.18 | 0.32 | 0.37 |
| Guarantee (Years) | 3 | 3 | 3 | 3 |
| Max. flow rate (l/h) | 300 | 500 | 800 | 1000 |
| Max. head height, metres (m) | 0.60 | 0.8 | 1 | 1.3 |
| Pressure-side connection (mm) | 13 | 13 | 17 | 17 |
| Suction-side connection (mm) | 13 | 0.5 | 17 | 17 |
| Suitable for freshwater | Yes | Yes | Yes | Yes |
| Suitable for saltwater | Yes | Yes | Yes | Yes |
GEX e-AIR 1000SB
- Fits on aquarium with water depth below 35cm, and 45cm in width or less
- Discharge rate at approximately 800cc / minute
- Single Type
- Size: Dimension 78x50x125mm
- Weight 178g
Tsurumi Family
Domestic Pumps
The FAMILY/FAMILY-A series are submersible single-phase portable drainage pumps. In addition to the 25mm hose coupling, it also comes with an easy-to-attach 15mm hose coupling as a standard accessory. The FAMILY-A pump with a cylindrical float switch reduces power consumption and extends operating life. Moreover, it can be used as a residue pump and drain water to 1mm in depth by attaching the optional residue adapter to the pump casing (for FAMILY-12, standard model only).Model Selection:
| Discharge Bore (mm) | 15, 25 |
| Motor Output(kW) | 0.1 |
| Discharge Bore (mm) | Model | Motor Output (kW) | Phase | Starting Method |
| 15, 25 | FAMILY-12 -Standard- | 0.1 | Single | Capacitor Run |
| 15, 25 | FAMILY-12A -Automatic- | 0.1 | Single | Capacitor Run |
Tsurumi PNI
Resin-made Pumps with Vortex Impeller
The PNI-series is a submersible semi-vortex pump designed for handling wastewater and liquid carrying small solid matters. It is made of resin and 304 stainless steel and excellent in corrosion-resistance. The semi-vortex pump design with moderate solids passage provides efficient performance for versatile applications. Liquid paraffin is used for the lubricating oil, which widens the application of the pump to decorative waterfalls, fishponds, aquaculture, etc.Model Selection:
| Discharge Bore (mm) | 50 |
| Motor Output(kW) | 0.4 - 0.75 |
| Discharge Bore (mm) | Model | Motor Output (kW) | Phase | Starting Method | Solids Passage (mm) |
| 50 | 50PNI2.4S | 0.4 | Single | Capacitor Run | 10 |
| 50 | 50PNI2.75S | 0.75 | Single | Capacitor Run | 10 |
Resun LP-40
The Resun Air Pump LP40 delivers with low noise a maximum air output of 3000L/hr (50 litres per minute), which is suitable for the vast majority of fish and koi ponds. It must be housed to be protected from dust ingestion. Dust will prematurely wear the rubber valves & diaphragms.
Installation hints:
- Do not install any brand of air pump of this size in the lounge room unless you like a continuous low noise hum whilst watching TV. Place the pump in a non-habitable room, or outside, and then plumb air line tubing to the tank diffusers.
- To increase the life of the rubber diaphragms, the unit must have back pressure. See details below.
- Electromagmetic linear diaphragm technology
- Low noise. Decibel levels measured in a quiet room using A-frequency weighting with medium back pressure loading on the pump: 41dB(A)+/- at 3m from air pump, 50dB(A)+/- at 500mm from air pump. A quite room ambient noise level is 30dB(A)+/-
- Plastic body
- Voltage/Wattage: 240V / 35W
- Automatic thermal cut-out overload protection
- Cable length: 1.5m
- Max pressure: 0.03MPa
- Max air output: 3000L/hr (50 Litres/minute)
- Air pump outlet diameter: 18mm
- Must be set-up above the water level
- Important: Rated IPX4 (meaning - Should be placed in a low dust environment but will tolerate rain and light sprinkling)
- Maximum water depth for placed airstones or air diffuser: 2.8m
- Supplied with a plastic 12 outlet manifold to suit 4mm silicon air line
- Air Pump dimensions: 245mm(L) x 175mm(W) x 185mm(H)
- Weight: Air Pump: 4.25kg. Cartoned pump: 4.85kg
JBL ProAir a50
An air pump for aquariums is an advantage during the night since plants need light to produce oxygen. In thinly planted aquariums the air pump supplies the necessary water circulation. In aquariums with dense planting the air pump provides the aquarium with oxygen at night, since the number of plants means the oxygen concentration can drop to a dangerous level. When disease is present in the aquarium the air pump increases the oxygen level in the water, an essential condition for many medications.
Simple to connect
Connect hose with air pump. Cut air hose and insert check valve. Cut the remaining hose to the desired length. Connect one end with check valve and other end with air stone. If possible mount the pump on the wall next to the aquarium. Hook for hanging up attached.
- For a reliable oxygen supply in aquariums: ready-to-install diaphragm pump with check valve and air stone - 50 l/h air outlet, > 160 mbar head pressure, 2.3 W power consumption
- Easy to install: connect pump with air hose and air stone, mount pump outside aquarium, place air stone in the aquarium
- Noise suppression air chamber, reinforced housing wall, vibration dampening rubber feet
- With a device for hanging, GS tested, 2.3 W and 50 l/h air output, > 160 mbar air pressure
- Package contents: air pump for aquariums from 10 - 50 l, 2 m air hose, air stone and check valve to prevent water backflow
Reviews
There are no reviews yet.