Resun LP-40
$120.00
The Resun Air Pump LP40 delivers with low noise a maximum air output of 3000L/hr (50 litres per minute), which is suitable for the vast majority of fish and koi ponds. It must be housed to be protected from dust ingestion. Dust will prematurely wear the rubber valves & diaphragms.
Installation hints:
- Do not install any brand of air pump of this size in the lounge room unless you like a continuous low noise hum whilst watching TV. Place the pump in a non-habitable room, or outside, and then plumb air line tubing to the tank diffusers.
- To increase the life of the rubber diaphragms, the unit must have back pressure. See details below.
Also used for: Air lift water pumping & aeration, Deep water septic tank aeration, Natural swimming pond or pool aeration, Aquaculture pond aeration, Commercial and industrial water aeration, Bubble baths
FEATURES
- Electromagmetic linear diaphragm technology
- Low noise. Decibel levels measured in a quiet room using A-frequency weighting with medium back pressure loading on the pump:
41dB(A)+/- at 3m from air pump, 50dB(A)+/- at 500mm from air pump. A quite room ambient noise level is 30dB(A)+/- - Plastic body
- Voltage/Wattage: 240V / 35W
- Automatic thermal cut-out overload protection
- Cable length: 1.5m
- Max pressure: 0.03MPa
- Max air output: 3000L/hr (50 Litres/minute)
- Air pump outlet diameter: 18mm
- Must be set-up above the water level
- Important: Rated IPX4 (meaning – Should be placed in a low dust environment but will tolerate rain and light sprinkling)
- Maximum water depth for placed airstones or air diffuser: 2.8m
- Supplied with a plastic 12 outlet manifold to suit 4mm silicon air line
- Air Pump dimensions: 245mm(L) x 175mm(W) x 185mm(H)
- Weight: Air Pump: 4.25kg. Cartoned pump: 4.85kg
Related products
Resun LP-100
The Resun Air Pump LP100 delivers with low noise a maximum high volume air output of 8400L/hr (140 litres per minute), which is suitable for larger aerobic biocycle sewage systems & fish and koi ponds. It must be housed to be protected from dust ingestion. Dust will prematurely wear the rubber valves & diaphragms.
Installation hints:
- Do not install any brand of air pump of this size in the lounge room unless you like a continuous low noise hum whilst watching TV. Place the pump in a non-habitable room, or outside, and then plumb air line tubing to the tank diffusers.
- To increase the life of the rubber diaphragms, the unit must have back pressure. See details below.
- Electromagmetic linear diaphragm technology
- Low noise. Decibel levels measured in a quiet room using A-frequency weighting with medium back pressure loading on the pump: 44dB(A)+/- at 3m from air pump, 55dB(A)+/- at 500mm from air pump. A quite room ambient noise level is 30dB(A)+/-
- Cast aluminium body
- Voltage/Wattage: 240V / 100W
- Automatic thermal cut-out overload protection
- Cable length: 1.5m
- Max pressure: 0.042 mPa / 0.42 bar / 420 mbar / 6.1 psi
- Max air output: 8400L/hr (140 Litres/minute)
- Air pump outlet diameter: 20mm
- Must be set-up above the water level
- Important: Rated IPX4 (meaning - Should be placed in a low dust environment but will tolerate rain and light sprinkling)
- Maximum water depth for placed airstones or air diffuser: 4.0m
- Supplied with a plastic 33 outlet x 46mm barbed manifold to suit 4mm - 8mm silicon air line
- Air Pump dimensions: 270mm(L)x200mm(W)x230mm(H)
- Weight: Air Pump, 6.6kg. Cartoned pump: 7.31kg
- As preventive maintenance, the industry standard would require that all linear electromagnetic air pumps running 24/7 should be dismantled, air jet cleaned & have the diaphragms & valves replaced every 18 months or 12,000 hours
- The pump must only be used in a dust free environment.
- The pump must only be run with a back pressure load. Do not use for long periods with unrestricted air flow. This will stretch the diaphragms to cause premature tearing or distortion. Back pressure is created by having the air diffusers or air stones deep in the water or if not possible, a flow control tap fitted into the air line.
SUNSUN JGP-2500L
Features:
- The shell is made of high quality reinforced ABS and durable.
- It adopts high-strength wear-resistant shaft core, which is resistant to acid and alkali and corrosion.
- Suitable for low water levels.
- Suitable for aquariums.
| Model | JGP-2500L |
| Rated power supply | 110V/220V/240V |
| Rated Frequency | 50Hz/60Hz |
| Rated Power | 40W |
| Maximum Lift | 2.3m |
| Maximum Flow | 2500L/h |
| Outlet (mm) | 12, 16, 20 |
| Power Cord Length | 2.5m |
| Weight | 0.9kg |
| Dimension | 135x105x152mm |
Resun LP-60
The Resun Air Pump LP60 delivers with low noise a maximum air output of 4200L/hr (70 litres per minute), which is suitable for the vast majority of fish and koi ponds. It must be housed to be protected from dust ingestion. Dust will prematurely wear the rubber valves & diaphragms.
Installation hints:
- Do not install any brand of air pump of this size in the lounge room unless you like a continuous low noise hum whilst watching TV. Place the pump in a non-habitable room, or outside, and then plumb air line tubing to the tank diffusers.
- To increase the life of the rubber diaphragms, the unit must have back pressure. See details below.
- Electromagmetic linear diaphragm technology
- Low noise. Decibel levels measured in a quiet room using A-frequency weighting with medium back pressure loading on the pump: 41dB(A)+/- at 3m from air pump, 53dB(A)+/- at 500mm from air pump. A quite room ambient noise level is 30dB(A)+/-
- Cast aluminium body
- Voltage/Wattage: 240V / 60W
- Automatic thermal cut-out overload protection
- Cable length: 1.5m
- Max pressure: 0.037MPa
- Max air output: 4200L/hr (70 Litres/minute)
- Air pump outlet diameter: 20mm
- Must be set-up above the water level
- Important: Rated IPX4 (meaning - Should be placed in a low dust environment but will tolerate rain and light sprinkling)
- Maximum water depth for placed airstones or air diffuser: 3.5m
- Supplied with a plastic 14 outlet manifold to suit 4mm silicon air line
- Air Pump dimensions: 245mm(L) x 205mm(W) x 210mm(H)
- Weight: Air Pump, 5.45kg. Cartoned pump: 6.3kg
- As preventive maintenance, the industry standard would require that all linear electromagnetic air pumps running 24/7 should be dismantled, air jet cleaned & have the diaphragms & valves replaced every 18 months or 12,000 hours
- The pump must only be used in a dust free environment.
- The pump must only be run with a back pressure load. Do not use for long periods with unrestricted air flow. This will stretch the diaphragms to cause premature tearing or distortion. Back pressure is created by having the air diffusers or air stones deep in the water or if not possible, a flow control tap fitted into the air line.
HAILEA ACO-99 Series Air Pump
| Model | ACO-9902 | ACO-9905 |
| Flowrate (l/min) | 2.5 | 6.5 |
| Power (W) | 2.2 | 6 |
Onga Leisuretime Pool Pump
- The range of LeisureTime pool pumps have been purposefully designed to provide maximum performance and corrosion resistance at a realistic cost.
Features
- Self-aligning barrel unions
- Elevated motor foot
- Corrosion resistant endshield
- Large hair and lint pot with see through lid
- Low friction lint pot O-ring
GEX e-AIR 1000SB
- Fits on aquarium with water depth below 35cm, and 45cm in width or less
- Discharge rate at approximately 800cc / minute
- Single Type
- Size: Dimension 78x50x125mm
- Weight 178g
Tsurumi Family
Domestic Pumps
The FAMILY/FAMILY-A series are submersible single-phase portable drainage pumps. In addition to the 25mm hose coupling, it also comes with an easy-to-attach 15mm hose coupling as a standard accessory. The FAMILY-A pump with a cylindrical float switch reduces power consumption and extends operating life. Moreover, it can be used as a residue pump and drain water to 1mm in depth by attaching the optional residue adapter to the pump casing (for FAMILY-12, standard model only).Model Selection:
| Discharge Bore (mm) | 15, 25 |
| Motor Output(kW) | 0.1 |
| Discharge Bore (mm) | Model | Motor Output (kW) | Phase | Starting Method |
| 15, 25 | FAMILY-12 -Standard- | 0.1 | Single | Capacitor Run |
| 15, 25 | FAMILY-12A -Automatic- | 0.1 | Single | Capacitor Run |
Reviews
There are no reviews yet.