| Size | 150ml, 1000ml |
|---|
Resun DC-MPQ-905 12V
$100.00
Design for the following area:
Ideal for provide oxygen to the living fishes in vehicles, fish markets and restaurants
Ideal supply oxygen in fish pond where don’t 240V power supply
Features:
The pump can operate from Solar Power, Battery Power or AC mains backup power
No need of oil, low energy consumption meet the demands of environmental protection.
Adoptions of pound-resisting diaphragms, high grade of ball bearings and balance centrifugal shafts ensure the pumps to work long.
Compact size – easy to install, operation and maintenance;
Technical Specifications:
Voltage: 12V?
Power: 100W
Pressure: 0.09MPa
Output: 100L/min
Diameter Outlet: 10mm
Divider: 10 outlets
Overall Dimension (cm): 23.5 X 14.3 X 17.5
Related products
Oase OptiMax 300 – 1000
- Proper movement: Ideal for efficient water circulation or for operating an aquarium filter
- Easy to adjust: The water flow rate can be easily adjusted
- Area of application: Only for use inside the aquarium and underwater
- Efficient: Particularly efficient water supply
- Compact design: The OptiMax 300 and 500 are particularly easy to conceal
- Practical: Two suction holders for mounting in place
| Model | OptiMax 300 | OptiMax 500 | OptiMax 800 | OptiMax 1000 |
| Dimensions (L x W x H) (mm) | 55 x 42 x 60 | 55 x 42 x 60 | 78 x 52 x 88 | 78 x 52 x 88 |
| Rated voltage | 230 V / 50 Hz | 230 V / 50 Hz | 230 V / 50 Hz | 230 V / 50 Hz |
| Power consumption (W) | 5 | 6 | 7 | 12 |
| Power cable length (m) | 1.50 | 1.5 | 1.5 | 1.5 |
| Net weight (kg) | 0.18 | 0.18 | 0.32 | 0.37 |
| Guarantee (Years) | 3 | 3 | 3 | 3 |
| Max. flow rate (l/h) | 300 | 500 | 800 | 1000 |
| Max. head height, metres (m) | 0.60 | 0.8 | 1 | 1.3 |
| Pressure-side connection (mm) | 13 | 13 | 17 | 17 |
| Suction-side connection (mm) | 13 | 0.5 | 17 | 17 |
| Suitable for freshwater | Yes | Yes | Yes | Yes |
| Suitable for saltwater | Yes | Yes | Yes | Yes |
Tsurumi PNI
Resin-made Pumps with Vortex Impeller
The PNI-series is a submersible semi-vortex pump designed for handling wastewater and liquid carrying small solid matters. It is made of resin and 304 stainless steel and excellent in corrosion-resistance. The semi-vortex pump design with moderate solids passage provides efficient performance for versatile applications. Liquid paraffin is used for the lubricating oil, which widens the application of the pump to decorative waterfalls, fishponds, aquaculture, etc.Model Selection:
| Discharge Bore (mm) | 50 |
| Motor Output(kW) | 0.4 - 0.75 |
| Discharge Bore (mm) | Model | Motor Output (kW) | Phase | Starting Method | Solids Passage (mm) |
| 50 | 50PNI2.4S | 0.4 | Single | Capacitor Run | 10 |
| 50 | 50PNI2.75S | 0.75 | Single | Capacitor Run | 10 |
DAB Nova
The submersible pump NOVA is suitable for automatically operated fixed and portable domestic applications like drainage or lifting water from tanks or rivers, it may be used in automatic version with the floating arm switch.
Operating range: from 1 to 16 m3/h, with head up to 10.2 metres.
Pumped liquid: dirty water without fibres.
Liquid temperature range: from 0 °C to +35 °C for domestic use.
Outlet: horizontal 1” ¼ F.
NOVA - Technical Sheet
Onga Leisuretime Pool Pump
- The range of LeisureTime pool pumps have been purposefully designed to provide maximum performance and corrosion resistance at a realistic cost.
Features
- Self-aligning barrel unions
- Elevated motor foot
- Corrosion resistant endshield
- Large hair and lint pot with see through lid
- Low friction lint pot O-ring
JBL ProAir a50
An air pump for aquariums is an advantage during the night since plants need light to produce oxygen. In thinly planted aquariums the air pump supplies the necessary water circulation. In aquariums with dense planting the air pump provides the aquarium with oxygen at night, since the number of plants means the oxygen concentration can drop to a dangerous level. When disease is present in the aquarium the air pump increases the oxygen level in the water, an essential condition for many medications.
Simple to connect
Connect hose with air pump. Cut air hose and insert check valve. Cut the remaining hose to the desired length. Connect one end with check valve and other end with air stone. If possible mount the pump on the wall next to the aquarium. Hook for hanging up attached.
- For a reliable oxygen supply in aquariums: ready-to-install diaphragm pump with check valve and air stone - 50 l/h air outlet, > 160 mbar head pressure, 2.3 W power consumption
- Easy to install: connect pump with air hose and air stone, mount pump outside aquarium, place air stone in the aquarium
- Noise suppression air chamber, reinforced housing wall, vibration dampening rubber feet
- With a device for hanging, GS tested, 2.3 W and 50 l/h air output, > 160 mbar air pressure
- Package contents: air pump for aquariums from 10 - 50 l, 2 m air hose, air stone and check valve to prevent water backflow
HAILEA HAP-Series Air Pump
| Model | HAP-60 | HAP-80 | HAP-120 |
| Flowrate (l/min) | 60 | 80 | 120 |
| Power (W) | 55 | 85 | 125 |
| Pressure | >0.035MPa | >0.036MPa | >0.038MPa |
| Common Pressure | 0.01MPa | 0.012MPa | 0.018MPa |
| Size | 203x165x153mm | 210x185x171mm | 265x215x198mm |
| Weight | 6kg | 7kg | 9.5kg |
Tsurumi OM3
Resin-made Pumps with Vortex Impeller
The OM-series is a submersible semi-vortex pump designed for handling household wastewater and liquid carrying small solid matters. The semi-vortex pump design with moderate solids passage provides efficient performance for versatile applications. Liquid paraffin is used for the lubricating oil, which widens the application of the pump to decorative waterfalls, fishponds, aquaculture, etc.Model Selection:
| Discharge Bore (mm) | 32 |
| Motor Output(kW) | 0.15 |
| Discharge Bore (mm) | Model | Motor Output (kW) | Phase | Starting Method | Solids Passage (mm) |
| 32 | OM3 | 0.15 | Single | Capacitor Run | 10 |
Tsurumi Family
Domestic Pumps
The FAMILY/FAMILY-A series are submersible single-phase portable drainage pumps. In addition to the 25mm hose coupling, it also comes with an easy-to-attach 15mm hose coupling as a standard accessory. The FAMILY-A pump with a cylindrical float switch reduces power consumption and extends operating life. Moreover, it can be used as a residue pump and drain water to 1mm in depth by attaching the optional residue adapter to the pump casing (for FAMILY-12, standard model only).Model Selection:
| Discharge Bore (mm) | 15, 25 |
| Motor Output(kW) | 0.1 |
| Discharge Bore (mm) | Model | Motor Output (kW) | Phase | Starting Method |
| 15, 25 | FAMILY-12 -Standard- | 0.1 | Single | Capacitor Run |
| 15, 25 | FAMILY-12A -Automatic- | 0.1 | Single | Capacitor Run |
Reviews
There are no reviews yet.