Mag-Float Cleaner (Large)

• Continuously monitors pH in freshwater
• No tests, no strips
• Lasts up to 4 times as long as competing products

Seachem pH Alert is a small unobtrusive sensor with a size that is almost half and lasts up to 4 times as long as competing products. It monitors the water 24 x 7 and changes colours according to the pH level. Seachem pH Alert continually monitors the pH level of freshwater aquarium and visually alerts you by colour changes on its sensor. Simply place the Seachem pH Alert in the aquarium or filter and it will monitor pH continuously. Its sensor changes color reversibly from yellow to orange to red, alerting you to shifts in pH levels between 5.4 and 8.0. Seachem pH Alert is for Freshwater use only.

Directions

Simply place Seachem pH Alert visibly anywhere in the aquarium or filter and match the sensor color to the corresponding pH reading on the color wheel. Its that easy. No chemicals or test procedures are required. When first put in service, response time will be about 30 minutes. Thereafter, pH shifts will register within ten minutes.

Indications

No care is required beyond removing algae with a clean, soft material. Do not use bleach, soap, detergents or hard objects to clean the sensor. Some dye medications may discolor the sensor. For maximum sensitivity, the unit should be read under natural daylight or daylight simulating light. Sensor exhaustion is indicated by a visible fading or washing out of sensor color. Once exhausted, it is time to replace pH Alert.

Quick and easy monitoring  Routine monitoring or safety check: The sera Quick Test provides the optimal possibility to check the most important water parameters (pH value, carbonate hardness, total hardness, nitrate, nitrite and chlorine) in the aquarium with just one test strip quickly and without any problems. Immerse a test strip in your tank for a second, then wait for one minute and compare the intensity of its colors to the chart on the package. A safe procedure that also supports beginners achieve best possible water quality in their aquariums. In case the measurement reveals deviations from the optimal levels, the sera liquid tests allow determining the differences exactly.

K MARINE WATER TEST KIT Positives and Negatives ✚ Measured by drop test value. ✚ Suitable for seawater -  Test the water always adding resources. The Colombo Navy Potassium Test (color 2) test accurately the potassium in your saltwater aquarium. This product works on the basis of potassium, but also contains the element Boron: both trace elements are important for especially the red dyei Coral. The optimal value is 400 mg / l. Colombo have produced test kits that are developed especially for seawater. These tests give the best results!   Colombo, 30 years of experience, that makes the difference.

Mg MARINE WATER TEST KIT Simple 5 step Magnesium Test Kit. This accurate magnesium test kit is easy to follow and produces accurate results for measuring the magnesium levels in your aquarium. Colombo have produced test kits that are developed especially for seawater. These tests give the best results!   Colombo, 30 years of experience, that makes the difference.