HAILEA HAP-Series Air Pump
$137.60 – $216.00
| Model | HAP-60 | HAP-80 | HAP-120 |
| Flowrate (l/min) | 60 | 80 | 120 |
| Power (W) | 55 | 85 | 125 |
| Pressure | >0.035MPa | >0.036MPa | >0.038MPa |
| Common Pressure | 0.01MPa | 0.012MPa | 0.018MPa |
| Size | 203x165x153mm | 210x185x171mm | 265x215x198mm |
| Weight | 6kg | 7kg | 9.5kg |
Additional information
| Model | HAP-60, HAP-80, HAP-120 |
|---|
Related products
sera air plus
Very energy saving and powerful air pumps
They are suitable for oxygen enrichment by means of an airstone, for operating air driven filters (e.g. sera internal filters L), or air driven moveable decoration elements.
Convenient: Easy membrane replacement due to modern module system.
Non-return valve included.
Resun AC-9902
- Twin outlet air pump
- Maximum output 4.0 ltr/min (240 ltr/hour)
- Maximum depth of the aquarium 21"
- Modern design with vibration absorbing feet
- Suitable for aquariums up to 180 ltr (40 gallon) and ponds up to 800 ltr
ANS Check Valve
2pcs/pack
Check valve to stop water from flowing in the wrong direction and accidentally draining an aquarium in the event of an air pump failure.
- Keep air flowing in the right direction and stop water from flowing out of the tank
- Use the air check valve as a safety precaution whenever using air pumps
- Use with aquarium air line tubing and an air pump to allow air out and keep water from flowing back
- not suitable for Pressurized Co2 system
ANGEL AQUA Air Stone (Cylinder)
DY103G (Cylinder) 15x70Lmm
DY103C (Cylinder) 30x80Lmm
DY103B (Cylinder) 30x105Lmm
DY103A (Cylinder) 30x130Lmm
| DY103-G | 70L × Φ15 | 0.6 §¤/min ± 50% | Cylinder |
| DY103-C | 80L × Φ30 | 1.0 §¤/min ± 50% | Cylinder |
| DY103-B | 105L × Φ30 | 1.5 §¤/min ± 50% | Cylinder |
| DY103-A | 130L × Φ30 | 2.0 §¤/min ± 50% | Cylinder |
Resun LP-60
The Resun Air Pump LP60 delivers with low noise a maximum air output of 4200L/hr (70 litres per minute), which is suitable for the vast majority of fish and koi ponds. It must be housed to be protected from dust ingestion. Dust will prematurely wear the rubber valves & diaphragms.
Installation hints:
- Do not install any brand of air pump of this size in the lounge room unless you like a continuous low noise hum whilst watching TV. Place the pump in a non-habitable room, or outside, and then plumb air line tubing to the tank diffusers.
- To increase the life of the rubber diaphragms, the unit must have back pressure. See details below.
- Electromagmetic linear diaphragm technology
- Low noise. Decibel levels measured in a quiet room using A-frequency weighting with medium back pressure loading on the pump: 41dB(A)+/- at 3m from air pump, 53dB(A)+/- at 500mm from air pump. A quite room ambient noise level is 30dB(A)+/-
- Cast aluminium body
- Voltage/Wattage: 240V / 60W
- Automatic thermal cut-out overload protection
- Cable length: 1.5m
- Max pressure: 0.037MPa
- Max air output: 4200L/hr (70 Litres/minute)
- Air pump outlet diameter: 20mm
- Must be set-up above the water level
- Important: Rated IPX4 (meaning - Should be placed in a low dust environment but will tolerate rain and light sprinkling)
- Maximum water depth for placed airstones or air diffuser: 3.5m
- Supplied with a plastic 14 outlet manifold to suit 4mm silicon air line
- Air Pump dimensions: 245mm(L) x 205mm(W) x 210mm(H)
- Weight: Air Pump, 5.45kg. Cartoned pump: 6.3kg
- As preventive maintenance, the industry standard would require that all linear electromagnetic air pumps running 24/7 should be dismantled, air jet cleaned & have the diaphragms & valves replaced every 18 months or 12,000 hours
- The pump must only be used in a dust free environment.
- The pump must only be run with a back pressure load. Do not use for long periods with unrestricted air flow. This will stretch the diaphragms to cause premature tearing or distortion. Back pressure is created by having the air diffusers or air stones deep in the water or if not possible, a flow control tap fitted into the air line.
AFEC ELITE
| Model | ELITE200/ELITE200A | ELITE600/ELITE600A |
| Motor Output | 0.3Hp/220w | 0.75Hp/550w |
| Voltage | 220-240V/50Hz | 220-240V/50Hz |
| Max.Head | 7m | 9m |
| Max.Capacity | 135 l/min | 260 l/min |
| Ampere | 1.56A | 4.2A |
Onga Leisuretime Pool Pump
- The range of LeisureTime pool pumps have been purposefully designed to provide maximum performance and corrosion resistance at a realistic cost.
Features
- Self-aligning barrel unions
- Elevated motor foot
- Corrosion resistant endshield
- Large hair and lint pot with see through lid
- Low friction lint pot O-ring
Resun LP-100
The Resun Air Pump LP100 delivers with low noise a maximum high volume air output of 8400L/hr (140 litres per minute), which is suitable for larger aerobic biocycle sewage systems & fish and koi ponds. It must be housed to be protected from dust ingestion. Dust will prematurely wear the rubber valves & diaphragms.
Installation hints:
- Do not install any brand of air pump of this size in the lounge room unless you like a continuous low noise hum whilst watching TV. Place the pump in a non-habitable room, or outside, and then plumb air line tubing to the tank diffusers.
- To increase the life of the rubber diaphragms, the unit must have back pressure. See details below.
- Electromagmetic linear diaphragm technology
- Low noise. Decibel levels measured in a quiet room using A-frequency weighting with medium back pressure loading on the pump: 44dB(A)+/- at 3m from air pump, 55dB(A)+/- at 500mm from air pump. A quite room ambient noise level is 30dB(A)+/-
- Cast aluminium body
- Voltage/Wattage: 240V / 100W
- Automatic thermal cut-out overload protection
- Cable length: 1.5m
- Max pressure: 0.042 mPa / 0.42 bar / 420 mbar / 6.1 psi
- Max air output: 8400L/hr (140 Litres/minute)
- Air pump outlet diameter: 20mm
- Must be set-up above the water level
- Important: Rated IPX4 (meaning - Should be placed in a low dust environment but will tolerate rain and light sprinkling)
- Maximum water depth for placed airstones or air diffuser: 4.0m
- Supplied with a plastic 33 outlet x 46mm barbed manifold to suit 4mm - 8mm silicon air line
- Air Pump dimensions: 270mm(L)x200mm(W)x230mm(H)
- Weight: Air Pump, 6.6kg. Cartoned pump: 7.31kg
- As preventive maintenance, the industry standard would require that all linear electromagnetic air pumps running 24/7 should be dismantled, air jet cleaned & have the diaphragms & valves replaced every 18 months or 12,000 hours
- The pump must only be used in a dust free environment.
- The pump must only be run with a back pressure load. Do not use for long periods with unrestricted air flow. This will stretch the diaphragms to cause premature tearing or distortion. Back pressure is created by having the air diffusers or air stones deep in the water or if not possible, a flow control tap fitted into the air line.
Reviews
There are no reviews yet.