ANS Siphon Cleaner “BALL”

High nitrate levels in your aquarium indicate a build-up of fish waste and organic compounds, resulting in poor water quality and an increase in algae growth. Contrarily, maintaining a low nitrate level improves the health of fish and invertebrates. Use the API® NITRATE TEST KIT to ensure that the nitrate levels in your tank are safe and healthy for your fish. The NITRATE TEST KIT reads parameters from 0 to 160 ppm and may be used for both fresh and saltwater aquariums. Sizes Contains 90 tests and includes 2 test solutions, easy-to-ready instructions, glass test tube and color chart

KH FRESHWATER TEST KIT Colombo KH Test Kits will help you ensure the correct Carbonate Hardness (KH) is maintained in your pond. For clear pond water and healthy fish and plants you need to monitor your KH and pH levels. KH is a measurement for the total amount of dissolved carbonates in the pond water. When the KH is too low the pH can fluctuate which is very harmful for the aquatic life. If the value is at least 5 KH is the pH-value remains stable. A KH value of 8 is optimal. Colombo have produced test kits that are developed especially for freshwater. These tests give the best results!   Colombo, 30 years of experience, that makes the difference.

• Continuously monitors pH in freshwater
• No tests, no strips
• Lasts up to 4 times as long as competing products

Seachem pH Alert is a small unobtrusive sensor with a size that is almost half and lasts up to 4 times as long as competing products. It monitors the water 24 x 7 and changes colours according to the pH level. Seachem pH Alert continually monitors the pH level of freshwater aquarium and visually alerts you by colour changes on its sensor. Simply place the Seachem pH Alert in the aquarium or filter and it will monitor pH continuously. Its sensor changes color reversibly from yellow to orange to red, alerting you to shifts in pH levels between 5.4 and 8.0. Seachem pH Alert is for Freshwater use only.

Directions

Simply place Seachem pH Alert visibly anywhere in the aquarium or filter and match the sensor color to the corresponding pH reading on the color wheel. Its that easy. No chemicals or test procedures are required. When first put in service, response time will be about 30 minutes. Thereafter, pH shifts will register within ten minutes.

Indications

No care is required beyond removing algae with a clean, soft material. Do not use bleach, soap, detergents or hard objects to clean the sensor. Some dye medications may discolor the sensor. For maximum sensitivity, the unit should be read under natural daylight or daylight simulating light. Sensor exhaustion is indicated by a visible fading or washing out of sensor color. Once exhausted, it is time to replace pH Alert.