ANS Clearmax Nano

• Removes phosphate, silicate, organics, metals, acids, and more
• 50/50 blend of MatrixCarbon and PhosGuard
• More convenient than two separate bags of media

• Binds ammonia and heavy metals
• Highest ammonia binding capacity of any zeolite
• Removes harmful metal ions like lead, copper, nickel and zinc
• Marine & Freshwater

Description

Seachem Zeolite media actively binds and removes ammonia and heavy metals ions such as lead, copper, nickel, zinc. The filter media ensures that the aquarium water is safe and free of harmful metallic toxins.

Advantages

Seachem Zeolite is a naturally occurring, highly-porous mineral that binds ammonia and heavy metals through an ion exchange mechanism. Seachem Zeolite has the highest ammonia binding capacity of any available zeolite; ten times higher than some products and twice the capacity of the closest competitor. Seachem Zeolite won't deplete calcium in saltwater, and it won't increase general hardness in freshwater, where the ionic strength is low.

Directions

For best results, Seachem Zeolite should be rinsed before use and placed so as to maximise the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag such as Seachem's The Bag or Zip Bag is recommended. Use 250 mL (1 cup) of Seachem Zeolite for every 200 L (50 US gallons). For smaller aquariums, the equivalent dose is 5 mL (1 level teaspoon) per 4 L (1 US gallon). This amount of Seachem Zeolite will remove up to 0.5 mg/L ammonia. Monitor ammonia levels, which should drop to zero within 24-48 hours. At this point, the zeolite can be removed or replaced with activated carbon, such as Seachem MatrixCarbon. For heavy metals removal, leave in service and replace monthly. For long term ammonia control, use Seachem Stability and Matrix. Use Ammonia Alert or MultiTest Free & Total Ammonia to directly monitor levels of free ammonia.

Maximum optimization of biological filtration  The original sera siporax Professional is suitable for use in both freshwater and marine aquariums as well as in ponds. Not depending on the kind of filter (internal/external/trickle filter), it maximizes the surface required for biological purification and provides the optimal substrate for the settling of necessary filter bacteria. The sera filter biostart included with the kit contains purification bacteria which activate sera siporax Professional biologically immediately upon addition and start pollutant breakdown in the water. Filter and breakdown processes in the bottom ground of natural waters are very important. Organic waste are processed by micro-organisms and are thus available for the natural cycle as a nutrient for aquatic plants – pollutants such as ammonium, nitrite and nitrate are removed. Since little waste per water amount is formed in nature, the present bottom surface is sufficient for housing a sufficient number of micro-organisms. However, an aquarium accommodates a small biotope in little space. It is therefore necessary to maximally enlarge the settling area for ensuring complete and safe breakdown of organic remainders. sera perfectly put this into practice with the unique high performance filter medium sera siporax. Unlike other filter rings available on the market, sera siporax consists of sintered glass. The unique material convinces due to a special three-dimensional pore structure. This allows maximum surface increase. At the same time, the fine pores provide ideal settling conditions for bacteria that break down pollutants. Since it is an interconnected system, the bacteria are permanently rinsed by water nd so can break down pollutants with best possible efficiency. Furthermore, the unique pore array allows for self-purification of the substrate and thus very long filter holding times. In combination with specialized bacteria, sera siporax even fulfills a variety of other special tasks, such as algae prevention or directed water conditioning.